|
|
|
| |
|
| SNS2 SERIES |
Application
Applicable to light, thin material, for
single, and progressive die application
in blanking, piercing, bending, forming,
interlink with ROT line or transfer unit.
 Features
- The symmetrical front-rear column
structure design minimizes deflection
and is most suitable for precision progressive
die applications.
- No inherent angular deflection, which
significantly extends die life and reduces
cost of tooling maintenance.
- High rigidity structure ensures consistent
dynamic precision
- High torque, enclosed wet clutch brake
unit requires minimal maintenance, eliminates
noise and pollution caused by airborne
particles, and significantly extends
lining life.
- U ser-friendly multifunctional control
system.
- Designed to allow simple integration
with automated auxiliary equipments.
|
 |
| |
 |
| |
Design
1. Motorized Side Adjusting Device
The motorized slide adjusting device is
adopted with a thin brake motor and operated
with push buttons. It provides stable positioning
accurancy and quick adjustment.
2. Digital Die Height Indicator
Motorized slide adjusting device fitted
with 0.1mm increment digital die height
indicator.
3. Dual Safety Valve
The interlock mechanism on the dual valve
keeps the clutch and brake form mis-actuation
when valve is default.
4. Standard Attachments
Variable frequency drive
Wet clutch and brake unit
Hydraulic overload protection system
Motorized slide adjustment
Automatic grease lubrication system
Air Counter Balance cylinder Manuel Oiler
Air Counter Balance System
Die height indicator (displayable unit:0.1mm)
Programmable limit switches
Overrun protection
Forward/Reverse Main Motor Direction Control
Counter
Batch counter
Pre-set counter
Chop counter
Maintenance counter
Miss-feed detector socket
Air ejector -1 set
Air tool socket -1 set
Tool Box
5. Optional Attachment
Die cushion
Safety light curtains
Quick die change system
Flywheel brake
NC feeder system
Isolation mounts
Tonnage monitor
Die safety block
Die area lighting
Air tool or ejector socket (1 additional)
|
 |
|
|
|
 |
|
 |
|
|
|
